Phone:  878-0000
Email:  john@JTElectronics.co.nz


Here are some of the products available for you to purchase

Products are available for purchase on TradeMe - just search for the product model number.
Thanks for supporting my hobby!

Product catalogue can be downloaded by clicking HERE

 

 




MISC HARDWARE

IMAGE DESCRIPTION
Model: JTE0402GRN. 0402 (1mm x 0.5mm) prewired green LED's. Sold in a 5pack with 5x 2200ohm resistorsItem Code: JTELECTRONICS-JTE0402GRN-0402-GREEN-LED (Click for more detail)
Item Description: Model: JTE0402GRN. 0402 (1mm x 0.5mm) prewired green LED's. Sold in a 5pack with 5x 2200ohm resistors
Condition: New
Model: JTE0402GORA. 0402 (1mm x 0.5mm) prewired orange LED's. Sold in a 5pack with 5x 2200ohm resistorsItem Code: JTELECTRONICS-JTE0402ORA-0402-ORANGE-LED (Click for more detail)
Item Description: Model: JTE0402GORA. 0402 (1mm x 0.5mm) prewired orange LED's. Sold in a 5pack with 5x 2200ohm resistors
Condition: New
Model: JTE0402RED. 0402 (1mm x 0.5mm) prewired red LED's. Sold in a 5pack with 5x 2200ohm resistorsItem Code: JTELECTRONICS-JTE0402RED-0402-RED-LED (Click for more detail)
Item Description: Model: JTE0402RED. 0402 (1mm x 0.5mm) prewired red LED's. Sold in a 5pack with 5x 2200ohm resistors
Condition: New
Model: JTE0402WW. 0402 (1mm x 0.5mm) prewired warm white LED's. Sold in a 5pack with 5x 2200ohm resistorsItem Code: JTELECTRONICS-JTE0402WW-0402-WARM-WHITE-LED (Click for more detail)
Item Description: Model: JTE0402WW. 0402 (1mm x 0.5mm) prewired warm white LED's. Sold in a 5pack with 5x 2200ohm resistors
Condition: New
Model: JTEBD1. A simple bridge-rectifier based block occupancy detector moduleItem Code: JTELECTRONICS-JTEBD1-BLOCK-DETECTOR-MODULE (Click for more detail)
Item Description: Model: JTEBD1. A simple bridge-rectifier based block occupancy detector module
Condition: New
Model: JTECASE1. Arduino Uno & Mega2560 compatible case with room for two extra shieldsItem Code: JTELECTRONICS-JTECASE1-ARDUINO-COMPATIBLE-CASE (Click for more detail)
Item Description: Model: JTECASE1. Arduino Uno & Mega2560 compatible case with room for two extra shields
Condition: New
Model JTECDU. Capacitor Discharge Unit for model train systems. Powered from 12-24VAC or DC sends short pulse to turnout/points motors to prevent damage.Item Code: JTELECTRONICS-JTECDU-CAPACITOR-DISCHARGE-UNIT (Click for more detail)
Item Description: Model JTECDU. Capacitor Discharge Unit for model train systems. Powered from 12-24VAC or DC sends short pulse to turnout/points motors to prevent damage.
Condition: New
Model: JTECF1. A low cost grade crossing LED flasher moduleItem Code: JTELECTRONICS-JTECF1-CROSSING-FLASHER-MODULE (Click for more detail)
Item Description: Model: JTECF1. A low cost grade crossing LED flasher module
Condition: New
Model: JTECF2. A low cost grade crossing LED flasher module with mechanical and electronic bell soundsItem Code: JTELECTRONICS-JTECF2-CROSSING-FLASHER-MODULE-WITH-SOUND (Click for more detail)
Item Description: Model: JTECF2. A low cost grade crossing LED flasher module with mechanical and electronic bell sounds
Condition: New
Model: JTEDCC9WIRE. Nine lengths of 30AWG 7x0.1mm conductor flexible tinned copper wire with each wire length approx. 1100mm, in 9 colousItem Code: JTELECTRONICS-JTEDCC9WIRE-NINE-30AWG-DCC-WIRES (Click for more detail)
Item Description: Model: JTEDCC9WIRE. Nine lengths of 30AWG 7x0.1mm conductor flexible tinned copper wire with each wire length approx. 1100mm, in 9 colous
Condition: New
Model JTEDCC-BF.  This product is discontinued. You can use a JTEDCC-MEGA controller and JTESEN1 sensor shield and configure Item Code: JTELECTRONICS-JTEDCC-BF-DCC-BACK-AND-FORTH-CONTROLLER-MODULE (Click for more detail)
Item Description: Model JTEDCC-BF. This product is discontinued. You can use a JTEDCC-MEGA controller and JTESEN1 sensor shield and configure "EX-RAIL" automation.
Condition: New
Model JTEDCC. This product is discontinued. You can use a JTEDCC-MEGA controller.Item Code: JTELECTRONICS-JTEDCC-DCC-CONTROLLER-MODULE (Click for more detail)
Item Description: Model JTEDCC. This product is discontinued. You can use a JTEDCC-MEGA controller.
Condition: New
Model: JTEDCC-MEGA. A fully functional DCC-EX based DCC basestation controller for Tinkerer/Engineer level use.Item Code: JTELECTRONICS-JTEDCC-MEGA-DCC-EX-CONTROLLER-MODULE (Click for more detail)
Item Description: Model: JTEDCC-MEGA. A fully functional DCC-EX based DCC basestation controller for Tinkerer/Engineer level use.
Condition: New
Model: JTEDCCPS8. 8-pin plug / socket that can be used as either a plug or a socket compatible with 8-pin DCC decoders or locomotivesItem Code: JTELECTRONICS-JTEDCCPS8-8-PIN-DCC-PLUG-SOCKET (Click for more detail)
Item Description: Model: JTEDCCPS8. 8-pin plug / socket that can be used as either a plug or a socket compatible with 8-pin DCC decoders or locomotives
Condition: New
Model JTEDCCS1. Small board to allow installation of an 8-pin DCC socket into a locomotive.Item Code: JTELECTRONICS-JTEDCCS1-DCC-SOCKET (Click for more detail)
Item Description: Model JTEDCCS1. Small board to allow installation of an 8-pin DCC socket into a locomotive.
Condition: New
Model: JTEDCS1. DC back and forth shuttle controllerItem Code: JTELECTRONICS-JTEDCS1-DC-BACK-AND-FORTH-SHUTTLE-CONTROLLER (Click for more detail)
Item Description: Model: JTEDCS1. DC back and forth shuttle controller
Condition: New
Model JTEILD. Uses infrared to detect presence of a locomotive passing by the sensor, without modifying the locomotive in any way. Detection range (of a sheet of white paper) up to 80mm.Item Code: JTELECTRONICS-JTEILD-INFRARED-LOCOMOTIVE-DETECTOR (Click for more detail)
Item Description: Model JTEILD. Uses infrared to detect presence of a locomotive passing by the sensor, without modifying the locomotive in any way. Detection range (of a sheet of white paper) up to 80mm.
Condition: New
Model JTELOCO4. Wiring board to fit inside locomotive to allow easy wiring of DC or DCC connectionsItem Code: JTELECTRONICS-JTELOCO4-LOCOMOTIVE-WIRING-BOARD (Click for more detail)
Item Description: Model JTELOCO4. Wiring board to fit inside locomotive to allow easy wiring of DC or DCC connections
Condition: New
Model JTELR1. 12V DPDT latching relay which holds its state after power is removed from control coils. Ideal for use in train crontrol to switch track power or turnout motorsItem Code: JTELECTRONICS-JTELR1-EXPANDABLE-LATCHING-RELAY-BOARD (Click for more detail)
Item Description: Model JTELR1. 12V DPDT latching relay which holds its state after power is removed from control coils. Ideal for use in train crontrol to switch track power or turnout motors
Condition: New
Model: JTEMEGATERM. Screw Terminal Shield that can be plugged into an Arduino Mega2560 shield to allow attachment of wires using the screw terminalsItem Code: JTELECTRONICS-JTEMEGATERM-MEGA2560-SCREW-TERMINAL-SHIELD (Click for more detail)
Item Description: Model: JTEMEGATERM. Screw Terminal Shield that can be plugged into an Arduino Mega2560 shield to allow attachment of wires using the screw terminals
Condition: New
Model: JTEMOT1. Standard Arduino motor shieldItem Code: JTELECTRONICS-JTEMOT1-ARDUINO-MOTOR-SHIELD (Click for more detail)
Item Description: Model: JTEMOT1. Standard Arduino motor shield
Condition: New
Model: JTERFL. Red Flashing LED's sold in a bag of 10Item Code: JTELECTRONICS-JTERFL-RED-FLASHING-LED (Click for more detail)
Item Description: Model: JTERFL. Red Flashing LED's sold in a bag of 10
Condition: New
Model: JTESEN1. Sensor shield to connect up to 8 sensors to Ardiuno UNO based controllersItem Code: JTELECTRONICS-JTESEN1-SENSOR-SHIELD (Click for more detail)
Item Description: Model: JTESEN1. Sensor shield to connect up to 8 sensors to Ardiuno UNO based controllers
Condition: New
Model JTETJ2. Track rail joiner for HO scale flexitrack. Sold in a bag of 10 boardsItem Code: JTELECTRONICS-JTETJ2-TRACK-RAIL-JOINER-HO-SCALE (Click for more detail)
Item Description: Model JTETJ2. Track rail joiner for HO scale flexitrack. Sold in a bag of 10 boards
Condition: New
Model: JTETT1-HO. Track tie / power feeder boards for HO scale trackItem Code: JTELECTRONICS-JTETT1-HO-TRACK-TIE-POWER-FEEDER-HO-SCALE (Click for more detail)
Item Description: Model: JTETT1-HO. Track tie / power feeder boards for HO scale track
Condition: New
Model: JTETT2-N. Track tie / power feeder boards for N scale trackItem Code: JTELECTRONICS-JTETT2-N-TRACK-TIE-POWER-FEEDER-N-SCALE (Click for more detail)
Item Description: Model: JTETT2-N. Track tie / power feeder boards for N scale track
Condition: New
Model: JTEWIFI1. DCC-EX Compatible WiFi BoardItem Code: JTELECTRONICS-JTEWIFI1-DCC-EX-COMPATIBLE-WIFI-BOARD (Click for more detail)
Item Description: Model: JTEWIFI1. DCC-EX Compatible WiFi Board
Condition: New



Pictures may not represent the exact product - for illustrative purposes only
Errors and omissions excepted
Displaying 27 items